TEMPSTAR® TEHF9MAE1002122

TEMPSTAR® F9MAE1002122A Gas Furnace, 115 VAC, 2200 cfm, 1 hp at 300 to 1300 rpm, 97 % AFUE, Multi-Position, Natural Gas

Manufacturer: Carrier
Part #: TEHF9MAE1002122
Customer Part #:
Login for Availability
Login for Price
AFUE Rating      :      97 %
Amperage Rating      :      14.8 A Maximum, 19.1 A Unit
Blower Size      :      11 in Dia x 10 in W
CFM Rating      :      2200 cfm
Cabinet Dimensions      :      21 in W x 29-1/2 in D x 35 in H
Configuration      :      Multi-Position
Connection Type      :      1/2 in NPT
Frequency Rating      :      60 Hz
Fuel Type      :      Natural Gas
HP Rating      :      1 hp at 300 to 1300 rpm
Input BTU Rating      :      100000 Btu/hr
Material      :      Steel
Number of Burners      :      5
Phase      :      1 ph
Series      :      F9MAE
Temperature Rise      :      50 - 80 deg F Initial, 35 - 65 deg F Low, 45 - 75 deg F High
Tonnage      :      5.5 ton at 400 cfm, 6 ton at 350 cfm
Transformer Rating      :      40 VA at 24 VAC
Voltage Rating      :      115 VAC

TEMPSTAR® Gas Furnace, Series: F9MAE, 100000 Btu/hr Input BTU Rating, 115 VAC, 14.8 A Maximum, 19.1 A Unit, 2200 cu-ft/min, 1 hp at 300 - 1300 rev/min, 97% AFUE, 1 -Phase, 60 Hz, Configuration: Multi-Position, 1/2 in NPT Connection, Natural Gas Fuel, 5 -Burner, 10 in W x 11 in Dia Blower Size, 21 in W x 35 in H x 29-1/2 in D Cabinet Dimensions, 5.5 ton at 400 cu-ft/min, 6 ton at 350 cu-ft/min, 40 V-A at 24 VAC Transformer, Steel, 50 - 80 deg F Initial, 35 - 65 deg F Low, 45 - 75 deg F High Rise

  • Extra SEER variable speed ECM blower motor
  • Certified to leak 2% or less of nominal air conditioning cu-ft/min delivered when pressurized to 1 in WC with all present air inlets, air outlets and condensate drain ports sealed
  • Tougher - flame roll-out sensors standard, adjustable heating blower off delay, factory set blower on delay, RPJ primary heat exchanger, stainless steel secondary heat exchanger, high temperature limit control prevents overheating, direct ignition with silicon nitride igniter
  • Direct vent (2-pipe), single pipe venting or ventilated combustion air
  • 24 VAC humidifier terminal and electronic air cleaner terminal
  • Innovative knobs for easy door removal and secure attachment
  • At least 12 different venting configurations
  • Through the casing flue pipe for counterflow or horizontal applications with accessory
  • Slide out heat exchanger and blower assembly
  • Quieter - operates quieter at lower heating rates, variable speed induced draft combustion blower, variable speed ECM blower motor
  • Supports one and two-stage cooling units
  • Extra AFUE efficiency
  • 4.5 - 13.6 in WC inlet gas pressure

back To Top