| Accuracy | : | +/-0.5 deg F with up to 500 ft of 18 AWG Wire to Sensors |
| Amperage Rating | : | 0.02 A |
| Color | : | White |
| Differential Temperature | : | 1 to 40 deg F Bang, 3 to 40 deg F PWM |
| Dimensions | : | 4-3/4 in H x 2-7/8 in W x 7/8 in D |
| Frequency Rating | : | 50/60 Hz |
| Humidity Rating | : | Less Than or Equal 90% Non-Condensing |
| Material | : | PVC |
| Power Source | : | Hardwired |
| Stages | : | 1 Heat/1 Cool |
| Temperature Rating | : | -40 to 239 deg F |
| Voltage Rating | : | 24 VAC/VDC +/-10% |
The 1-stage setpoint control 150 is designed to operate a single component of a heating or cooling system in order to maintain a set temperature. It can be used in applications ranging from heating a swimming pool to maintaining a constant slab temperature in a commercial car wash bay. This control regulates a constant setpoint water temperature for heating or cooling. The 150 is designed to operate a single relay (rated at 240 V, 8 A) to control a single device such as a boiler, pump or valve.
Tekmar® Setpoint Control, 24 VAC/VDC +/-10%, 0.02 A, 50/60 Hz Frequency, 1 Heat/1 Cool Stages, 1 to 40 deg F Bang, 3 to 40 deg F PWM Differential, -40 to 239 deg F, Less Than or Equal 90% Non-Condensing Humidity, +/-0.5 deg F with up to 500 ft of 18 AWG Wire to Sensors Accuracy, Hardwired Power Source, Dimensions: 4-3/4 in H x 2-7/8 in W x 7/8 in D, PVC, White
- Heat or cool setpoint control
- Pulse width modulation control
- Digital display
- Normally open and normally closed relay
- Microprocessor control, this is not a safety (limit) control
- NEMA Type 1 enclosure
- Indoor use only, -20 to 120 deg F , RH less than or equal 90% non-condensing ambient conditions
- 240 VAC, 8 A, 1/4 hp relay
- NTC thermistor, 10 kohm at 77deg F, ß=3892 temperature sensor
- 10 y memory backup programmed settings
- -85 to 302 deg F temperature display
- 0 - 19 min, 50 sec time delay 1 and 2
- LCD push button user interface
- Indoor only -20 to 120 deg F less than 90% RH non-condensing ambient condition