| Amperage Rating | : | 2 A |
| Dimensions | : | 6-1/2 in Dia x 14 in H |
| Flow Rate | : | 0 to 15.5 gpm |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/40 hp, 1/25 hp |
| Head Range | : | 0 to 15 ft |
| Material | : | Bronze Case |
| Phase | : | 1 ph |
| Pressure Rating | : | 125 psi |
| Size | : | 3/4 in NPT |
| Speed Rating | : | 3250 rpm |
| Temperature Rating | : | 32 to 185 deg F Fluid |
| Voltage Rating | : | 120 VAC |
The Taco radiant mixing block is a breakthrough in the design, control and installation of radiant systems. The RMB-1 is a complete injection mixing system, combining a variable speed injection mixing control, injection circulator, system circulator and air elimination all in a single unit.
Taco Comfort Solutions® Radiant Mixing Block, 3/4 in NPT, 120 VAC, 2 A, 0 to 15.5 gpm Flow Rate, 1/40 hp, 1/25 hp, 3250 rpm, 60 Hz, 1 ph Bronze Case, 32 to 185 deg F Fluid, 125 psi, 6-1/2 in Dia x 14 in H, 0 to 15 ft Head Range
- All-in-one injection piping, pumping, air elimination and control package
- Only 4-pipe connections required
- Plug-in low voltage connections
- Solid state microprocessor design
- Greatly decreases installation time, substantial space savings
- Bronze casing for open or closed systems, replaceable cartridge design
- Maintenance-free, wet-rotor circulators
- 2-operation modes - outdoor reset and set point with or without delta T limiting
- Powered or unpowered demand signal, integral check valve
- Main system pump contact, 100% pump operation/control override switch
- Automatic pump exercise, adjustable reset ratio
- Warm weather shutdown, boiler control or enable setting
- Boiler Protection
- Large LCD display
- Includes outdoor and (2) strap-on sensors