| CFM Rating | : | 50 to 75 cfm |
| Color | : | Dove Gray |
| Dimensions | : | 16-5/8 in H x 4-3/8 in D |
| Finish | : | Baked Enamel/Zinc-Plated |
| Frequency Rating | : | 60 Hz |
| Material | : | Steel |
| Phase | : | 1 ph |
| Pressure Drop | : | 2-3/4 ft |
| Voltage Rating | : | 120 V |
Smith's Profile series fan convectors (PSU) are slim, attractive surface mounted units with a base skirt which allows them to be wall mounted or floor mounted. All units feature a 2 position max-off-min switch with internal aquastat for individual heater control. A Btu/hr range from 3000 Btu/hr - 40000 Btu/hr gives a fast, efficient way to heat a room while using a minimum of wall space. A pleasing neutral light grey paint finish is ideal for many decors. This high grade finish may be used as is or may be field painted, wall papered or marbleized.
Smith's Fan Convector, 120 V, 60 Hz, 1 ph, 50 to 75 cfm CFM Rating, 2-3/4 ft Pressure Drop, Steel, Dove Gray, Baked Enamel/Zinc-Plated, 16-5/8 in H x 4-3/8 in D
- Constructed of an internal heatpack section-mounted to a well designed back chassis
- A highly efficient, headered coil, made of copper tubes expanded into smooth aluminum plate fins (10 FPI), tested at 300 lb/sq-in, and sealed for quality heat exchanger
- The heat exchanger is positioned in each PSU unit for maximum heat transfer over the coil
- High spec tangential EBM fan and motor assembly consists of high static fan wheel and scroll, detachable motor, replaceable "easy glide" sleeve bearings fan and motor assembly
- All PSU units have integral two speed, maximum to minimum, and switches
- Supply and return connections are 1/2 in sweat connections located on the left hand side of the unit as you face the grille water connection
- A water vent with wide convenient screwdriver slot is accessible on the left of the unit underneath the cover
- Quiet, efficient operation
- Three-position fan switch for maximum control
- Features the E-Z hanger mounting bracket