Samsung SAMMWRSH11UN

Samsung MWR-SH11UN Simple Touch Controller, Outputs: 16, 328 ft L Cable

Manufacturer: Samsung
Part #: SAMMWRSH11UN
Customer Part #:
Login for Availability
Login for Price
Cable Length      :      328 ft
Outputs      :      16
Overall Depth      :      3/4 in
Overall Length      :      3-11/16 in
Overall Width      :      4-13/16 in
Suitable For Use With      :      Samsung NASA DVM S, CAC, RAC and FJM Indoor Units Only
Voltage Rating      :      12 V

Samsung Simple Touch Controller, 12 V, 16 Outputs, 328 ft Cable Length, 3-11/16 in Overall Length, 4-13/16 in Overall Width, 3/4 in Overall Depth, For Use With: Samsung NASA DVM S, CAC, RAC and FJM Indoor Units Only

  • Internal temperature sensor
  • Backlight display
  • Built-in infrared receiver to allow control of indoor unit wirelessly with AREH03U, AR-EH04U, AR-KH03U or AR-KH04U wireless controllers
  • Indoor unit operation on-off, operation mode, set temperature, louver position (cassette, ceiling, wall units) and fan speed settings
  • Error display
  • Filter replacement alarm display and reset
  • Single indoor unit control or multiple unit control (maximum 16-units)
  • Partial controller button lock (on-off, temperature setting, fan speed, timer function, louver swing, sleep function, quiet function, outing function and operation mode buttons)
  • Upper and lower temperature setting restriction
  • Heat, cool, dry, fan and auto mode skip options (skips specified mode on wired controller)
  • Single event timer function (on-off control, 30 min to 24 hr timer setting options)
  • System/indoor unit function and operation indication (defrost, error, restricted controller, central control and SPI status)
  • Service mode for connected indoor unit operation monitoring, addressing and setup
  • Can be used to specify mode master while connected to a single indoor unit when used with heat pump systems to control system mode (heating or cooling)
  • Outing function to keep a minimum heating (61 to 72 deg F) and cooling (77 to 86 deg F) temperature while you are away
  • When outing mode is activated, the unit will operate at the specified outing temperature
  • If indoor temperature is 9 deg F difference from desired outing temperature, the indoor unit will turn on
  • If indoor temperature is the same as desired outing temperature, the indoor unit will turn off automatically
  • This is repeated depending on indoor temperature for 12 hr
  • After 12 hr, outing mode is released/canceled

back To Top