| Capacity | : | 85 gal |
| Dimensions | : | 28-1/4 in Dia x 70-1/4 in H |
| Element Material | : | Titanium |
| Element Wattage | : | 3000 W |
| First Hour Delivery | : | 91 gph |
| Lead-Free/Contains Lead | : | Lead-Free |
| Phase | : | 1 ph |
| Pressure Rating | : | 150 psi |
| Recovery Rate | : | 18.2 gph |
| Voltage Rating | : | 240 V |
Rheem® Electric Water Heater, 85 gal Capacity, 91 gph First Hour Delivery, 18.2 gph Recovery Rate, 3000 W Element Wattage, 240 V, 1 ph Phase, 150 psi, Lead-Free, 28-1/4 in Dia x 70-1/4 in H, Titanium Element
- Seamless, blow-molded, polybutene tank - impervious to rust and corrosion
- Multiple layers of filament wound fiberglass give the tank unmatched strength
- Polyurethane insulation helps reduce energy consumption and standby heat loss
- Recessed drain valve is out of the way of brooms and scrubbers
- High-temperature polysulfone dip tube
- Tough® molded polyethylene outer shell resists dents, scratches and salt air
- Well insulated for reduced standby heat loss
- Pipe wrap energy saving kit included to achieve maximum energy savings
- Marathon's lightweight tank is easier to maneuver and position
- Bowl shaped tank bottom allows complete sediment draining
- Water tight grommets keep out overhead moisture and condensation
- Thermally fused upper element provides protection against dry firing
- Titanium upper and lower elements for superior resistance to lime build-up
- Full-flow, brass drain valve
- Temperature and pressure relief valve and factory installed vacuum relief valve
- Non-simultaneous wiring