| Amperage Rating | : | 0.35 A |
| BTU Rating | : | 12000 Btu/hr |
| CFM Rating | : | 345 cfm |
| Compressor Type | : | 1/4 in, 3/8 in |
| Connection Type | : | Flared |
| Finish | : | Galvanized |
| Frequency Rating | : | 60 Hz |
| Material | : | Steel |
| Mounting Type | : | Wall |
| Overall Height | : | 7-13/16 in |
| Overall Length | : | 23-5/8 in |
| Overall Width | : | 35-7/16 in |
| Phase | : | 1 ph |
| Power Rating | : | 76 W |
| Refrigerant Type | : | R-410A |
| Sound Level | : | 32 dBA |
| Temperature Rating | : | 80 deg F |
| Tonnage | : | 1 ton |
| Voltage Rating | : | 208/230 V |
Quietside® Mini-Split Heat Pump, 208/230 V, 0.35 A, 76 W, 60 Hz, 1 ph Phase, 12000 Btu/hr, 345 cfm, Flared Connection, 1/4 in, 3/8 in Compressor, R-410A Refrigerant, Tonnage: 1 ton, 32 dBA Sound Level, Wall Mounting, Steel, Finish: Galvanized, 80 deg F, 23-5/8 in Overall Length, 35-7/16 in Overall Width, 7-13/16 in Overall Height
- High voltage terminal block temperature sensor to disable unit in the event overheating of power connection
- Gravity drain as standard
- The indoor unit shall be powered by the outdoor unit
- The heat exchanger shall be mechanically bonded fin to copper tube
- Indoor fan is a twin backward centrifugal-type with a single fan motor
- Three-speed fan setting and auto setting
- Control signal shall be a DDC-type signal
- Interconnect control wire between outdoor and indoor units shall be 16 AWG x two-shielded
- Controls shall integrate with a BMS system
- The system shall integrate with the Samsung controls solution
- The unit includes a simple filter as standard, field provided filtration is recommended
- Pressure drop across the filter must be factored into the total ESP