| Color | : | Dark Amber |
| Composition | : | Greater Than 95% Petroleum Hydrocarbon Mixture |
| Flash Point | : | Greater Than 340 deg F |
| Form | : | Liquid |
| Net Content | : | 1 qt |
| Odor/Scent | : | Slight Hydrocarbon |
| Specific Gravity | : | 0.91 |
| VOC Content | : | Greater Than 10 g/L |
| Viscosity | : | 27.5 - 33.5 sq-mm/sec at 40 deg C Kinematic |
Hercules clear cutting oil is compounded for cutting clean, unbroken threads when using manual or low-RPM threading machine operations on small sizes of steel or brass pipe. Low torque means less work, less heat generated and a longer life for tools. These are superior quality cutting oils formulated to produce consistent results under all weather conditions. Hercules Cutting Oils contain activated sulphur to provide anti-weld properties, reduce friction and prevent excessive heat generation, thus minimizing material expansion resulting in ill-fitting joints. The high film strength of Hercules cutting oils maintains a continuous contact of the lubricant with the work assuring quick, accurate and high quality cuts with minimal tool wear. Lubricants contain no nitrosamine forming compounds or chlorinated oils. A blend of high quality mineral oils with sulphur base. Used for cutting clean, unbroken threads during manual or low rpm threading machine operations on small sizes of steel and brass pipe. Also applicable for hacksawing and light drilling. Will not stain copper or brass materials.
Oatey® Hercules Cutting Oil, 1 qt, Composition: Greater Than 95% Petroleum Hydrocarbon Mixture, Liquid, Dark Amber, Slight Hydrocarbon, 0.91 Specific Gravity, Greater Than 340 deg F Flash Point, Greater Than 10 g/L VOC, 27.5 - 33.5 sq-mm/sec at 40 deg C Kinematic Viscosity
- Contains activated sulfur-lard and extreme pressure-antiwear additives
- Free of chlorine, other halogens, PCBs and heavy metals
- Better heat dissipation
- Long-lasting formula with less residue backup
- Less Than 6 based on similar products partition co-efficient
- Negligible solubility in water