| Amperage Rating | : | 5.15 A |
| BTU Rating | : | 160000 Btu/hr |
| CFM Rating | : | 2870 cfm |
| Connection Size | : | 1/2 in |
| Dimensions | : | 40-1/4 in H x 25-5/8 in W x 34-3/4 in D |
| Finish | : | Aluminized/Baked-On Polyester Powder-Coated |
| Flow Rate | : | 819 fpm |
| Frequency Rating | : | 60 Hz |
| Fuel Type | : | Natural Gas |
| HP Rating | : | 1/6 hp |
| Heat Throw | : | 51 ft |
| Ignition Type | : | Intermittent Pilot |
| Material | : | Steel |
| Motor Type | : | PSC |
| Mounting Height | : | 15 ft |
| Phase | : | 1 ph |
| Rotational Speed | : | 1075 rpm |
| Series | : | PDP Series |
| Voltage Rating | : | 115 V |
MODINE Unit Heater, Series: PDP Series, 160000 Btu/hr, 115 V, 5.15 A, 819 fpm, 2870 cfm CFM Rating, 1/6 hp HP Rating, 1 ph, 60 Hz, 1/2 in, Natural Gas, PSC Motor, 1075 rpm Rotational Speed, Intermittent Pilot Ignition, 15 ft Mounting Height, 51 ft Heat Throw, Steel, Aluminized/Baked-On Polyester Powder-Coated, 40-1/4 in H x 25-5/8 in W x 34-3/4 in D
- 115 V service/25 V thermostat, one-stage control system
- 100% shut off, intermittent pilot ignition with continuous retry
- 20 in Dia fan
- 80% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster
- A power exhaust that can be rotated 180 deg, the unit can be vented vertically or horizontally
- A safety pressure-switch to assure safe venting conditions
- Designed to utilize the smallest-diameter vent pipe possible
- Wing screws so that the bottom pan can be dropped without a screwdriver or nut driver
- A levels hanging mechanism for easy field adjustments after adding accessories that may change the unit's centre of gravity
- Aluminized steel heat exchanger/burner
- A automatic reset vent pressure switch is supplied on all power vented unit heaters to prevent operation of the main burner in the event there is restricted venting of flue products
- All power vented unit heaters are supplied with a round vent pipe connection, power exhauster may be rotated 180 deg to allow for various venting directions
- The PDP (propeller) high efficiency II gas-fired unit heaters are a generation of products that are inexpensive to install, easy-to-use and offer excellent in-service economy