| Capillary Length | : | 36 in |
| Connection Type | : | Flare Nut |
| Dimensions | : | 2-1/16 in L x 4 in W x 4-1/16 in H |
| Material | : | Steel |
| Mounting Type | : | Universal-Mounting Bracket |
| Nominal Size | : | 1/4 in |
| Phase | : | 1 |
| Pressure Rating | : | 20 inHg to 100 lb/sq-in, 7 to 50 lb/sq-in Maximum Differential, 325 lbf/sq-in Maximum Overpressure, 100 lbf/sq-in Maximum Working |
| Series | : | P70 Series |
| Switching Action | : | SPST Open High |
| Voltage Rating | : | 120-240 VAC |
The P70 Controls for low pressure applications are designed primarily for low pressure cut-out control, pump-down control, and capacity control on commercial refrigeration and air conditioning applications. These controls are available in several pressure ranges and are compatible with most common refrigerants. They may also be used on other non-corrosive fluid applications. Ammonia-compatible models are also available.
Johnson Controls Penn Low Pressure Controller, P70 Series, 120-240 VAC, 1 Phase, 1/4 in Nominal, Flare Nut Connection, SPST Open High Switching Action, 20 inHg to 100 lb/sq-in, 7 to 50 lb/sq-in Maximum Differential, 325 lbf/sq-in Maximum Overpressure, 100 lbf/sq-in Maximum Working, Universal-Mounting Bracket Mounting, Steel, 36 in Capillary Length, 2-1/16 in L x 4 in W x 4-1/16 in H
- All-steel case and cover built to provide long-lasting, rugged protection for internal components
- Sight-set calibrated pressure adjustment - displays a visible pressure scale, fully adjustable through the range without removing the cover
- NEMA 1 enclosure, no adjustment knob
- For non-corrosive refrigerants
- Motor - 2 hp at 120 VAC 3 hp at 208/240 VAC 1 phase
- Motor full load A - 24 A at 120 VAC 18.7 A at 208 VAC 17 A at 240 VAC full load 1 PH
- Motor locked rotor A - 144 A at 120 VAC 112.2 A at 208 VAC 102 A at 240 VAC locked rotor 1 PH
- Non-inductive A - 22 A at 120/208/240 VAC, Pilot-duty: 125 V-A at 120 - 600 VAC 57.5 V-A at 120 - 300 VDC