Additional Information | : | 36000 Btu, 3 ton Capacity, 0 to 95% Non-Condensing Humidity, 7.36 x 2.97 in Screw Hole Center Points, Compressor Output, 20 A Interrupt Rating, IP65 Enclosure Type |
Amperage Rating | : | 16 A |
Dimensions | : | 7.94 in L x 4.2 in W x 2.1 in H |
Domestic/Import | : | Domestic |
Frequency Rating | : | 50/60 Hz |
Series | : | ICM870 Series |
Temperature Rating | : | -40 to 149 deg F |
Voltage Rating | : | 100-240 V |
The ICM870 series soft starts ARE compatible with 2-stage HVAC units. If your 2-stage unit has two compressors, you will need two ICM870 units. The ICM870 Soft Start is intended for residential, commercial, RV & marine applications. The ICM870 integrates compressor or motor in-rush current over startup time, thus reducing peak current demand on a power supply source by up to 70%. Effectively reducing power draw to the A/C, the ICM870 utilizes a built-in self learning algorithm to deliver the optimal in-rush current per application. The ICM870 will monitor system health including voltage, current, compressor startup and integrity. Upon a fault condition, it will halt operation and initiate a 3 minute anti-short cycle routine while providing diagnostic fault information by means of an LED indicator.
ICM™ Motor Soft Starter, Series: ICM870 Series, 100-240 V, 16 A, 50/60 Hz, -40 to 149 deg F, 7.94 in L x 4.2 in W x 2.1 in H, Domestic/Import: Domestic, Additional Information: 36000 Btu, 3 ton Capacity, 0 to 95% Non-Condensing Humidity, 7.36 x 2.97 in Screw Hole Center Points, Compressor Output, 20 A Interrupt Rating, IP65 Enclosure Type
- Reduces in-rush current/draw necessary at startup by up to 70%
- Prolong the life of the A/C by reducing excessive torque, wear and tear
- Built-in dynamic start delay
- Reduce loud noises, light flickering, and breaker trips
- Built-in self-learning algorithm
- Over-current protection
- Over/under voltage monitoring
- Built-in start capacitor
- LED fault indicators
- Ultrasonic sealed tamper-proof enclosure
- Installation hardware is included