| Length | : | 12 in |
| Material | : | Stainless Steel |
| Nominal Size | : | 4 in |
| Outside Diameter | : | 4.4 in |
heatfab® Safe-T Vent EZ Seal Pipe, 4 in Nominal, Stainless Steel, 4.4 in OD, 12 in Length
- Install vent with a continuous pitch of 1/4 in/ft, sloping upward toward the termination
- Important to provide adequate support to a Saf-T Vent® EZ seal system
- Support horizontal portions of the vent system at 6 ft intervals
- Vertical sections should be supported at least every 30 ft and after every offset or transition