Cleanfit TETBLUE1

Cleanfit 70887 Tape, 0.0035 in Thick, 1 in W, 1429 in L, Blue, PTFE, 0.8 g/cc Density

Manufacturer: The Mill-Rose Company
Part #: TETBLUE1
Customer Part #:
Login for Availability
Login for Price
Color      :      Blue
Density      :      0.8 g/cc
Length      :      1429 in
Material      :      PTFE
Pressure Rating      :      10000 psi
Temperature Rating      :      -400 to 500 deg F
Tensile Strength      :      15 N/sq-mm
Thickness      :      0.0035 in
Width      :      1 in

Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. That's 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape. Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.

Cleanfit Tape, 0.0035 in Thickness, 1 in Width, 1429 in Length, Blue, PTFE, 10000 psi, Density: 0.8 g/cc, 15 N/sq-mm Tensile Strength, -400 to 500 deg F

  • Compatible with a broad range of gases and liquids
  • Compatible with a broad range of piping materials will not harden or crack on the joints
  • Effective across a broad range of temperatures and pressures
  • Acts as a thread lubricant and anti-seize
  • Prevents electrolytic corrosion of threads
  • No curing time
  • Unlimited shelf life
  • Non-flammable
  • 99.6% PTFE less than 0.4% composition
  • Greater than 100% elongation
  • Mill-Rose blue monster thread sealing tape has been used to seal fittings carrying water and oil at pressures up to 10000 lb/sq-in or 69000kPa
  • Temperature range - 450 to 500 deg F PTFE is completely stable up to 500 deg F
  • Decomposition is slow upto 750 deg F
  • Although decomposition will occur on contact with naked flames
  • Note-pressure ratings are relative to the quality and torque of the fittings and the amount of tape used
  • Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Cleanfit_70887_Catalog.pdf
  • Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Cleanfit_70887_Specification_Sheet.pdf
  • videoVideo Link https://www.youtube.com/embed/qOMdn5G2WLg

back To Top