| Connection Type | : | Press Union |
| Dimensions | : | 10-3/4 in L |
| Domestic/Import | : | Import |
| Finish | : | Epoxy Resin-Painted |
| Flow Rate | : | 11 gpm |
| Material | : | Steel |
| Maximum Percentage of Glycol | : | 50 % |
| Nominal Size | : | 1 in |
| Pressure Rating | : | 150 psi |
| Series | : | 548 Series |
| Suitable Media | : | Non-Hazardous Glycol Solution, Water |
| Temperature Rating | : | 32 to 212 deg F |
Furnish and install on the plans and described herein, a Caleffi hydro separator as manufactured by Caleffi. Each separator must be designed with an epoxy resin painted steel body, 300 stainless steel internal baffle, preformed insulation, a 1/2 in threaded thermometer pocket well front center, a brass blowdown valve with garden hose connection and automatic brass air vent isolated manually with service check valve. The separator design must include sweat, press or NPT female connections with cast iron union nuts. Each separator shall be a Caleffi model 548 Series or approved equal.
Caleffi Hydro Separator, 548 Series, 1 in Nominal, Press Union Connection, 150 psi, 32 to 212 deg F, Non-Hazardous Glycol Solution, Water Suitable Media, 50 % Maximum Percentage of Glycol, 11 gpm Flow Rate, Steel, Finish: Epoxy Resin-Painted, 10-3/4 in L, Domestic/Import: Import
- Presscon™ copper connections makes installation of Caleffi components fast, easy and efficient using standard press compression tools
- Special slots in EPDM O-ring allows fluid to leak during system testing if unpressed and the perfect leak-proof seal when completely pressed
- Temperature range of 0 to 250 deg F with pressure rating to 200 psi and up to 50% glycol mixture
- Fittings meet low-lead law requirements for use in accordance with US and Canadian plumbing and mechanical codes