| Connection Size 1 | : | 1/4 in |
| Connection Size 2 | : | 1/4 in |
| Connection Size 3 | : | 1/4 in |
| Connection Size 4 | : | 1/4 in |
| Connection Type 1 | : | Flared |
| Connection Type 2 | : | FIP |
| Connection Type | : | Flared|FIP |
| Dimensions | : | 1.09 in L |
| Finish | : | Rough |
| Fitting Type | : | Adapter |
| Hex Size | : | 5/8 in |
| Material Construction | : | Brass |
| Material | : | Brass |
| Pressure Rating | : | 600 to 3000 psi |
| Series | : | 46 Series |
| Temperature Rating | : | -65 to 250 deg F |
| Thread Size | : | 7/16-20 |
| Tube OD | : | 1/4 in |
The flare female reducing adaptor is highly dependable and an economical choice of fitting for fluid and air transmission within multiple application including heating and other industrial markets. This all brass fitting features a vibration resistant construction. It resists mechanical pullout and is designed for high pressure service.
BrassCraft® Adapter, 46 Series, Adapter Fitting, 1/4 in Connection Size 1, Connection Type 1: Flared, 1/4 in Connection Size 2, Connection Type 2: FIP, Connection Size 3: 1/4 in, Connection Size 4: 1/4 in, Flared|FIP Connection, Brass, Material Construction: Brass, Finish: Rough, 1/4 in Tube OD, 7/16-20 Thread, 5/8 in Hex, 1.09 in L, 600 to 3000 psi, -65 to 250 deg F
- Designed for use with aluminum, copper, brass and welded steel tubing that can be flared
- Designed for use with fuel, oil, liquefied petroleum and natural gas lines
- Recommended for higher pressures than those covered by compression fittings
- Flare fitting resists mechanical pull-out
- Reusable with long or short nuts