| Connection Size 1 | : | 1/2 in |
| Connection Type 1 | : | Flare Tube |
| Connection Type | : | Flared |
| Dimensions | : | 1 in L |
| Finish | : | Rough |
| Fitting Type | : | Nut |
| Hex Size | : | 7/8 in |
| Material Construction | : | Brass |
| Material | : | Brass |
| Pressure Rating | : | 600 to 3000 psi |
| Series | : | 41S Series |
| Temperature Rating | : | -65 to 250 deg F |
| Thread Size | : | 3/4-16 |
| Tube OD | : | 1/2 in |
The 1/2 in flare nut short is highly dependable and an economical choice of fitting for fluid and air transmission within multiple application including heating and other industrial markets. This all brass fitting features a vibration-resistant construction. It resists mechanical pullout and is designed for high pressure service.
BrassCraft® 45 deg Short Flare Nut, 41S Series, Nut Fitting, 1/2 in Connection Size 1, Connection Type 1: Flare Tube, Flared Connection, Brass, Material Construction: Brass, Finish: Rough, 3/4-16 Thread, 7/8 in Hex, 1/2 in Tube OD, 1 in L, 600 to 3000 psi, -65 to 250 deg F
- Designed for use with aluminum, copper, brass and welded steel tubing that can be flared
- Recommended for higher pressures than those covered by compression fittings
- Resists mechanical pull-out
- Not for use in potable water applications