| Connection Size 1 | : | 3/8 in |
| Connection Size 2 | : | 3/8 in |
| Connection Size 3 | : | 3/8 in |
| Connection Size 4 | : | 3/8 in |
| Connection Type 1 | : | Flared |
| Connection Type 2 | : | Flared |
| Connection Type 3 | : | Flared |
| Connection Type 4 | : | Flared |
| Connection Type | : | Flared|Flared|Flared|Flared |
| Finish | : | Rough |
| Fitting Type | : | 90 deg Elbow |
| Material Construction | : | Brass |
| Material | : | Brass |
| Pressure Rating | : | 600 to 3000 psi |
| Series | : | 155 Series |
| Temperature Rating | : | -65 to 250 deg F |
| Tube OD | : | 3/8 in |
The flare elbow is highly dependable and an economical choice of fitting for fluid and air transmission within multiple application including heating and other industrial markets. This all brass fitting features a vibration resistant construction. It resists mechanical pullout and is designed for high pressure service.
BrassCraft® Union Elbow, 155 Series, 90 deg Elbow Fitting, 3/8 in Connection Size 1, Connection Type 1: Flared, 3/8 in Connection Size 2, Connection Type 2: Flared, Connection Size 3: 3/8 in, Connection Type 3: Flared, Connection Size 4: 3/8 in, Connection Type 4: Flared, Flared|Flared|Flared|Flared Connection, Brass, Material Construction: Brass, Finish: Rough, 3/8 in Tube OD, 600 to 3000 psi, -65 to 250 deg F
- Designed for use with aluminum, copper, brass and welded steel tubing that can be flared
- Designed for use with fuel, oil, liquefied petroleum and natural gas lines
- Recommended for higher pressures than those covered by compression fittings
- Resists mechanical pullout