| Connection Size 1 | : | 1/2 in |
| Connection Size 2 | : | 1/2 in |
| Connection Size 3 | : | 1/2 in |
| Connection Type 1 | : | OD Tube |
| Connection Type 2 | : | OD Tube |
| Connection Type 3 | : | OD Tube |
| Connection Type | : | Tube|Tube|Tube |
| Finish | : | Rough |
| Fitting Type | : | Tee |
| For Use With | : | Aluminum, Copper, Brass and Welded Steel Tubing |
| Material Construction | : | Brass |
| Material | : | Brass |
| Pressure Rating | : | 600 to 3000 psi |
| Series | : | 144 Series |
| Temperature Rating | : | -65 to 250 deg F |
| Thread Size | : | 3/4-16 |
| Tube OD | : | 1/2 in |
The Flare Tee is highly dependable and an economical choice of fitting for fluid and air transmission within multiple application including heating and other industrial markets. This all-brass fitting features a vibration resistant construction. It resists mechanical pullout and is designed for high pressure service. The temperature range is minus 65 degrees F to 250 degrees
BrassCraft® Flare Tee, 144 Series, Tee Fitting, 1/2 in Connection Size 1, Connection Type 1: OD Tube, 1/2 in Connection Size 2, Connection Type 2: OD Tube, Connection Size 3: 1/2 in, Connection Type 3: OD Tube, Tube|Tube|Tube Connection, Brass, Material Construction: Brass, Finish: Rough, 3/4-16 Thread, 1/2 in Tube OD, For Use With: Aluminum, Copper, Brass and Welded Steel Tubing, 600 to 3000 psi, -65 to 250 deg F
- Brass construction
- 1/2 in. O.D. Tube, All 3 Ends
- Designed for use with aluminum, copper, brass and welded steel tubing that can be flared
- Designed for use with fuel, oil, liquefied petroleum (LP) and natural gas lines
- Recommended for higher pressures than those covered by compression fittings
- Resists mechanical pullout
- Rough Brass
- Not for use in potable water applications
- May be used in both indoors and outdoors
- Temperature rating: -65deg to 250deg F at maximum operating pressures
- Pressure rating: 600 to 3,000 PSI