| BTU Rating | : | 65000 Btu/hr |
| Capacity | : | 57 gal |
| Connection Type | : | NPT |
| Continuous Draw | : | 98 gph |
| Dimensions | : | 22 in Dia x 60 in H |
| First Hour Delivery | : | 148 gph |
| Flow Rate | : | 8 gpm |
| Lead-Free/Contains Lead | : | Lead-Free |
| Material | : | Steel |
| Pressure Rating | : | 150 psi |
| Series | : | PowerStor2® Series |
| Standby Loss | : | 0.7 deg F/hr |
| Temperature Rating | : | 180 deg F |
Bradford White® Indirect Water Heater, PowerStor2® Series, 57 gal Capacity, 65000 Btu/hr, 8 gpm Flow Rate, 148 gph First Hour Delivery, 0.7 deg F/hr Standby Loss, NPT Connection, 150 psi, Continuous Draw: 98 gph, Steel, Lead-Free, 180 deg F, 22 in Dia x 60 in H
- Double wall 1-1/2 in OD glass-coated (vitraglas) steel coil heat exchanger
- Factory installed Hydrojet® total performance system
- An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F
- Fast acting surface-mount thermostat for automatic temperature control
- 2 in non-CFC foam insulation covers the sides and top of the tank, reducing heat loss
- Heavy-gauge steel automatically formed, rolled and welded to assure a continuous seam for glass lining
- Temperature and pressure relief valve included
- Durable tamper-proof design low restriction brass drain valve
- Two protective aluminum rods provide added protection against corrosion for long trouble-free service
- Up to 10 gal/min flow, with less than 5 ft of head loss, greatly reduces the required pump size for heat exchanger