Bohn BOHLET090B

Bohn LET Series LET090 LET090BK Walk-In Unit Cooler With PSC Motor, 9000 Btu/hr BTU, 1300 cfm, 208 to 230 V, 60 Hz

Manufacturer: Lennox International
Part #: BOHLET090B
Customer Part #:
Login for Availability
Login for Price
Amperage Rating      :      1 A
BTU Rating      :      9000 Btu/hr
CFM Rating      :      1300 cfm
Connection Size      :      1/4 in, 1/2 in, 3/4 in, 7/8 in
Connection Type      :      MNPT x OD Tube
Dimensions      :      16 in H x 45-1/2 in L x 14-11/16 in D
Fins per Inch      :      6 FPI
Frequency Rating      :      60 Hz
HP Rating      :      1/15 hp
Model      :      LET090
Number of Fans      :      2
Phase      :      1 ph
Power Rating      :      182 W
Series      :      LET Series
Voltage Rating      :      208 to 230 V

Bohn Walk-In Unit Cooler, Series: LET Series, Model: LET090, 208 to 230 V, 1 A, 182 W, 1/15 hp HP Rating, 60 Hz, 1 ph, 9000 Btu/hr, 1300 cfm CFM Rating, MNPT x OD Tube, 1/4 in, 1/2 in, 3/4 in, 7/8 in, 2 Number of Fans, 6 FPI Fins per Inch, 16 in H x 45-1/2 in L x 14-11/16 in D

  • Cabinet design features front access panels on each side for easy access to electrical and refrigeration components
  • All electrical components factory wired to terminal board and identified, making it easy to field wire the unit
  • Liquid line solenoid wire harness is factory-installed for quick installation
  • Pre-drilled holes on the back of the unit for room thermostat
  • Coil heater slots have been enlarged for easier installation and replacement
  • On four - six fan models, drain pan has a lanyard for easy and safe access
  • Motors plug into wiring harness for easier servicing
  • Sweat connections to reduce potential for leaks
  • Molded fan guard design made of strong plastic material
  • Heavy gauge grained aluminum cabinet cleans easily and looks attractive
  • Internal panels are isolated for quiet operation
  • Internally enhanced tubing and fin design for higher efficiency, reduced heater wattages
  • Fixed defrost termination for electric, adjustable defrost termination for hot gas
  • Extended drain pan heaters for more uniform defrost throughout the drain pan and additional heat in end compartments
  • Large diameter drain hole (3/4 in ID) is located on the back of the unit
  • Minimal height of the low profile Series makes it ideal for low ceiling coolers
  • Vintage
  • Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Bohn_LLE136BK_Catalog.pdf

back To Top