| Amperage Rating | : | 1.9 A |
| Bearing Type | : | Sleeve |
| Connection Size | : | 2 in |
| Connection Type | : | Flange |
| Dimensions | : | 8-1/2 in H x 16-5/8 in W |
| Flow Rate | : | 71 gpm |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/6 hp |
| Inlet Size | : | 2 in |
| Material | : | Bronze |
| Maximum Head | : | 0 to 10 ft |
| Maximum Pressure | : | 125 psi |
| Model | : | 2 BNFI |
| Motor Speed Rating | : | 1725 rpm |
| Outlet Size | : | 2 in |
| Phase | : | 1 ph |
| Series | : | Series 100 |
| Temperature Rating | : | 250 deg F |
| Voltage Rating | : | 115 VAC |
The industry standard circulator for decades, Series 100 is still the one by which most others are judged. With well over 10 million units installed, the Series 100 remains a leader in applications such as hydronic heating and domestic hot water circulation. Series 100 three-piece, oil lubricated design provides for easy field service with bearings, shaft and seal all housed in an assembly which can be easily repaired or replaced. The Series 100 oil lubricated motor is specifically designed for the Series 100 and its resilient mounting provides quiet, dependable service with minimum annual lubrication. UL and CSA listings are standard. The design of this motor, coupled with its overall hydraulic performance, allows the Series 100 to overcome system related noise caused by valves, fittings or piping.
Bell & Gossett Circulator Pump, Series: Series 100, Model: 2 BNFI, 71 gpm Flow Rate, 2 in Inlet, 2 in Outlet, 0 to 10 ft Maximum Head, 115 VAC, 1.9 A, 60 Hz, 125 psi Maximum Pressure, 1725 rpm Motor Speed Rating, 1/6 hp, 2 in Connection, Flange Connection, 1 ph, 250 deg F, Sleeve Bearing, Bronze, 8-1/2 in H x 16-5/8 in W