| Additional Information | : | Plastic Impeller Material |
| Amperage Rating | : | 1.9 A |
| Connection Size | : | 1 in, 1-1/4 in, 1-1/2 in |
| Connection Type | : | Flanged |
| Flow Rate | : | 150 gpm |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/6 hp |
| Material | : | Carbon Steel/Iron |
| Maximum Head | : | 35 ft |
| Maximum Pressure | : | 125 psi |
| Model | : | HV NFI |
| Motor Speed Rating | : | 1725 rpm |
| Mounting Type | : | In-Line |
| Phase | : | 1 ph |
| Series | : | HV Series |
| Temperature Rating | : | 225 deg F |
| Voltage Rating | : | 115 VAC |
Bell & Gossett Circulator Pump, HV Series, Model: HV NFI, 150 gpm Flow Rate, 35 ft Maximum Head, 115 VAC, 1.9 A, 60 Hz, 125 psi Maximum Pressure, 1725 rpm Motor Speed Rating, 1/6 hp, 1 in, 1-1/4 in, 1-1/2 in Connection, Flanged Connection, 1 ph Phase, In-Line Mounting, 225 deg F, Carbon Steel/Iron, Additional Information: Plastic Impeller Material
- Series HV NFI cast iron pumps are dependable, in-line booster pumps intended to pump water through closed loop systems for heating and cooling
- The Series HV features a three-piece design
- The Series HV is designed for applications that require increased flow and head pressures
- This innovative design provides for easy field service as the bearings, shaft and seal are all housed within the bearing assembly
- That assembly can then be easily repaired or entirely replaced without disturbing the other components of your pump
- The Series HV resilient motor mounting is another feature unique to Bell & Gossett
- The mounting, combined with spring-loaded couplers, means your pump will run quietly and efficiently
- The Series HV BNFI features a plastic impeller
- Carbon on ceramic mechanical seal
- Heat treated carbon steel shaft
- A tube of Bell & Gossett oil along with flange gaskets and mounting hardware are included with the pump