| Connection Type | : | Sweat x Flanged |
| Dimensions | : | 4-1/64 in L x 4-7/16 in W x 3.656 in H |
| Handle Material | : | Steel |
| Lead-Free/Contains Lead | : | Yes |
| Material | : | Brass |
| Model | : | CTFS-1 |
| Nominal Size | : | 1 in |
| Packing Material | : | PTFE |
| Pressure Rating | : | 150 lbf/sq-in |
| Seal Material | : | PTFE |
| Stem Material | : | Brass |
| Temperature Rating | : | 200 deg F |
| Trim Material | : | Brass |
Check-Trol is the solution for circulator installations. Installing a Check-Trol on the discharge of the circulator gives you the features of a flow control valve, isolation valve and companion flange. The ball valve allows the circulator to be removed from the system without draining the system. The internal spring check prevents gravity circulation. Free floating companion flange makes pump installation a snap. Another advantage of the Check-Trol is the minimal pressure drop, especially when compared to the losses that can be experienced when a check valve is installed internal to the circulator. The Check-Trol flanges are packaged with an isolation flange of the same size to create a pair. Capscrews and nuts are included.
Bell & Gossett Check-Trol Isolation Flow Control Valve, Model: CTFS-1, 1 in Nominal, Sweat x Flanged Connection, 150 lbf/sq-in, 200 deg F, Brass, Steel Handle, PTFE Packing, PTFE Seal, Brass Stem, Brass Trim, 4-1/64 in L x 4-7/16 in W x 3.656 in H, Yes
- Combines 3-valves in one - isolation valve, check valve and companion flange
- Free floating flange allows easy alignment and installation of pumps
- Prevents gravity circulation
- Isolates the circulator so you don't need to drain the entire system
- 50 state lead-free
- Chrome-plated steel flange
- Nitrile, acetal, stainless steel spring check