| Amperage Rating | : | 5 A |
| BTU Rating | : | 399900 Btu/hr |
| Capacity | : | 119 gal |
| Connection Type | : | NPT |
| Dimensions | : | 33-1/8 in Dia x 75-3/4 in H |
| Energy Star Compliant | : | Yes |
| Finish | : | Glass |
| Frequency Rating | : | 60 Hz |
| Fuel Type | : | Natural Gas |
| Ignition Type | : | Electronic |
| Lead-Free/Contains Lead | : | Contains Lead |
| Material | : | Steel |
| Phase | : | 1 ph |
| Power Rating | : | 117 kW |
| Pressure Rating | : | 160 psi |
| Recovery Efficiency | : | 95 % |
| Recovery Rate | : | 1535 gph |
| Temperature Rating | : | 90 to 180 deg F |
| Vent Diameter | : | 4 in |
| Vent Type | : | Forced Draft Direct |
| Voltage Rating | : | 120 V |
The full line of AO Smith® Cyclone® Mxi condensing water heaters has been designed to provide years of dependable service and feature industry leading technology. Models deliver thermal efficiencies of 95% and higher. The unique helical coil heat exchanger limits weld joints for optimal service life while maximizing heat transfer. Cyclone® is the industry leader in high efficiency commercial water heating. The current Mxi modulating models adjust firing rate to the specific demand further increasing efficiency and money savings.
AO Smith® Water Heater, 119 gal Capacity, 399900 Btu/hr, 117 kW, 1535 gph Recovery Rate, Forced Draft Direct Vent, 5 A, 120 V, 60 Hz, 1 ph Phase, NPT Connection, 160 psi, Energy Star Compliant: Yes, Recovery Efficiency: 95 %, 4 in Vent Diameter, Natural Gas Fuel, Electronic Ignition, Steel, Finish: Glass, Contains Lead, 90 to 180 deg F, 33-1/8 in Dia x 75-3/4 in H
- Exclusive AO Smith® designed color touch display control system
- Provides detailed water heater status information
- Precise temperature control adjustable from 90 to 180 deg
- Built-in diagnostics
- Intelligent demand response (IDR) feature senses large water draws and automatically adjusts the differential set point, this feature increases the hot water available when it is needed the most
- Positioned in center of tank, surrounded by water to virtually eliminate radiant heat loss from chamber
- Spiral heat exchanger keeps hot burner gases swirling, uses centrifugal force to maximize efficiency of heat transfer to water in tank
- Spiral heat exchanger reduces lime scale from forming on water side surfaces, which maintains energy efficiency over time
- Provides long-lasting tank protection in varying water conditions
- Powered anodes are non-sacrificial
- Automatically adjusts output needed to properly protect the tank
- Glass coating is applied using a liquid slush coating technique to ensure uniform coating
- Heat exchanger coil is glassed both externally and internally for optimum protection
- Conventional power venting or direct venting
- Vents vertically or through a sidewall
- Front located exhaust and condensate connections allow for easy install and access
- Vents with low cost PVC sch 40 intake and exhaust pipe, approved for optional CPVC sch 40, polypropylene and AL29-4C stainless steel vent materials
- Direct vent intake and exhaust pipe can terminate separately outside building or through single opening, using concentric vent assembly
- Down-fired pre-mix burner provides optimum efficiency and quiet operation
- Top-mounted burner position prevents condensation from affecting burner operation